Every EV charger is an electrical job. A home Level 2 charger needs a circuit, a panel check and often a permit. A row of DC fast chargers needs switchgear, conduit runs and utility coordination. Either way, the person doing the work needs an Arkansas electrical license.
If you’re an electrical contractor in Bentonville, Rogers, Springdale or Fayetteville and you want to add charger work, these are the steps to hire for it. They run in order, from defining the job to the first week on site.
1. Decide which job you’re hiring for
“EV charger installer” covers very different work. Pick one before you write anything.
- Residential installer. Level 2 chargers in garages and driveways. Panel load checks, new 240-volt circuits, permits, and talking with homeowners.
- Commercial electrician. Multiple chargers at workplaces, apartments and stores. Larger feeders, trenching, load management and coordination with other trades.
- DC fast charger electrician. High-power equipment, switchgear and service upgrades. Utility coordination and commissioning with the charger manufacturer.
- Helper or apprentice. Pulls wire, digs, sets equipment and learns under supervision.
One crew can do all of it. But the license, pay and experience you need change with each one.
2. Match the job to an Arkansas license
Arkansas licenses electricians statewide through the Board of Electrical Examiners, part of the Department of Labor and Licensing. The licenses you’ll see most:
- Journeyman electrician. A completed four-year U.S. DOL-approved apprenticeship, or eight years (16,000 hours) of experience, credited at no more than 2,000 hours a year.
- Residential journeyman. Two years of experience. Fine for home chargers, not for commercial sites.
- Master electrician. Six years of experience, including two years as a licensed journeyman.
Apprentices must be registered within 30 days of hire with the Board, the Office of Skills Development and the U.S. Department of Labor, and the registration renews every year. A journeyman or master can supervise up to three apprentices on a job. First-year apprentices on non-residential work need continuous supervision.
If you’re hiring from out of state, Arkansas accepts journeyman licenses from 18 states, including Texas and Oklahoma, some with conditions. Only original licenses qualify. For the full rules, fees and reciprocity list, read the Arkansas electrical license guide.
Low voltage work has only a narrow exemption here. It covers telecommunications firms doing only low voltage work. It doesn’t cover fire alarm, security or controls that aren’t part of a telecom system.
3. Set the pay from real numbers
Arkansas electricians earned a median of $23.59 an hour statewide, with an annual mean of $53,470 (BLS, May 2025). Electrician helpers earned a median of $18.99 an hour statewide, with an annual mean of $39,760 (BLS, May 2025). These are state figures for all electricians, not just charger work.
Treat the median as a starting point. A journeyman who has commissioned DC fast chargers is a narrower hire than a general residential electrician. Pay for the skill you actually need, and put the range in the post.
Demand is real in this corner of the state. Walmart, headquartered in Bentonville, builds and runs its own EV fast-charging network. It energized its 100th store with fast charging in August 2026, and the company says most sites have 8 to 16 stalls with chargers that deliver up to 400 kW (Walmart, August 21, 2026). Projects like that draw on the same electricians you want to hire.
4. Write a post that answers the obvious questions
Electricians decide in seconds whether a post is worth reading. Put these near the top:
- Job title that matches the work, such as “Journeyman electrician, EV charger installs.”
- License required: journeyman or residential journeyman.
- Pay range and overtime.
- Where the work is: Benton and Washington counties, or farther.
- Residential, commercial or fast-charger work, and the split between them.
- Truck, tools and phone.
- Charger brands you install, if you have regular ones.
For a deeper look at the role, the interview and the credentials to check, see this guide to hiring EV charging electricians.
5. Put the job where electricians will see it
Many contractors start with referrals from their own crew, then add Indeed, ZipRecruiter or local Facebook groups. Those reach a lot of people, but you’ll sort through applicants who have never held a license. Staffing agencies can fill a short gap, at a markup.
The more direct option is Best Electrician Jobs. It’s a job board just for electrical and low voltage work. You post the job yourself, and applications come straight to you. If you’d rather not run the search, use Best Electrician Jobs’ recruiting service. You send a crew request with the roles, job site, start date and pay. Will, who runs the site, goes through his database of 35,000 journeyman electricians and 100,000 apprentices, calls people to check license and experience, and sends you the ones who fit. You interview them and make every hiring decision. Sending a request costs nothing.
6. Build a pipeline with apprentices
Charger work is a good fit for apprentices. Much of it is repeatable, and a supervised apprentice can do a lot of the trenching, mounting and wire pulling.
NorthWest Arkansas Community College runs a four-year electrical apprenticeship with 576 classroom hours and 8,000 hours on the job. Applicants must be 18 and employed under a licensed electrician. Classes run from August to May. If you sponsor apprentices, that’s your local program.
7. Screen and verify before the offer
Check three things for every finalist.
The license. Confirm the license type and status with the Arkansas Board of Electrical Examiners. Licenses renew every year, with eight hours of continuing education per National Electrical Code cycle. Lapsed licenses happen.
The charger experience. Ask about a specific install. What size was the circuit? Did the panel have room? Who pulled the permit, and did it pass inspection? For commercial work, ask about load management and commissioning.
The extra credentials. Some projects require more than a license. Chargers paid for with federal NEVI funds fall under 23 CFR 680, which requires the electricians who install or maintain them to hold EVITP certification or a certificate from a registered apprenticeship program that includes charger training. Manufacturer training is a separate check. If your contracts require any of these, say so in the post.
8. Make the offer and handle the paperwork
Put the pay, schedule, start date and any vehicle terms in writing. If the hire is an apprentice, register them within 30 days of the start date. If they’re coming from another state, confirm their reciprocity status with the Board before day one.
9. Plan the first week
Pair the new hire with your best charger installer for the first several jobs. Walk them through your permit process, your inspection routine and the charger brands you install most. Check their work on the first few installs yourself.
That’s the whole process. Define the job, match the license, pay a real number and verify before you hire. Everything else is follow-through.


